Kézi jelzésadó
ROP-4001M
The ROP-4001M and ROP-4001MH manual call points are designed to send information about a fire to the interoperating fire alarm control panel by a person who notices the fire and manually initiates the call point.
The manual call points may be attached ONLY to the POLON 4000 fire alarm system detection lines/loops.
The manual call points may be attached ONLY to the POLON 4000 fire alarm system detection lines/loops.
Kézi jelzésadó
ROP-63
The ROP-63 and ROP-63H manual call points are designed to send information about a fire to the interoperating fire alarm control panel by a person who notices the fire and manually initiates the call point.
The ROP-63 and ROP-63H manual call points are actuated (they switch contacts) after striking or firmly pressing the protective glass and pressing the alarm button. The protective glass when struck snaps upwards enabling access to the alarm button to be pressed in order to actuate the alarm. ROP-63 and ROP-63H call points are installed in the IGNIS 1000/2000 fire alarm system lines.
The ROP-63 and ROP-63H manual call points are actuated (they switch contacts) after striking or firmly pressing the protective glass and pressing the alarm button. The protective glass when struck snaps upwards enabling access to the alarm button to be pressed in order to actuate the alarm. ROP-63 and ROP-63H call points are installed in the IGNIS 1000/2000 fire alarm system lines.
Kézi jelzésadó
PO-63
The PO-6x manual call points are designed for manual activation of smoke flaps.
Three kinds of the manual call points are available:
Three kinds of the manual call points are available:
Kézi jelzésadó
PO-62
The PO-6x manual call points are designed for manual activation of smoke flaps.
Three kinds of the manual call points are available:
Three kinds of the manual call points are available:
Kézi jelzésadó
PO-61
The PO-6x manual call points are designed for manual activation of smoke flaps.
Three kinds of the manual call points are available:
Three kinds of the manual call points are available:
Kézi jelzésadó (kültéri)
ROP-4001MH
The ROP-4001M and ROP-4001MH manual call points are designed to send information about a fire to the interoperating fire alarm control panel by a person who notices the fire and manually initiates the call point.
The manual call points may be attached ONLY to the POLON 4000 fire alarm system detection lines/loops.
The manual call points may be attached ONLY to the POLON 4000 fire alarm system detection lines/loops.
Kézi jelzésadó (kültéri)
ROP-63H
The ROP-63 and ROP-63H manual call points are designed to send information about a fire to the interoperating fire alarm control panel by a person who notices the fire and manually initiates the call point.
The ROP-63 and ROP-63H manual call points are actuated (they switch contacts) after striking or firmly pressing the protective glass and pressing the alarm button. The protective glass when struck snaps upwards enabling access to the alarm button to be pressed in order to actuate the alarm. ROP-63 and ROP-63H call points are installed in the IGNIS 1000/2000 fire alarm system lines.
The ROP-63 and ROP-63H manual call points are actuated (they switch contacts) after striking or firmly pressing the protective glass and pressing the alarm button. The protective glass when struck snaps upwards enabling access to the alarm button to be pressed in order to actuate the alarm. ROP-63 and ROP-63H call points are installed in the IGNIS 1000/2000 fire alarm system lines.
Riasztás Indikátor
WZ-31
The WZ-31 alarm indicator is designed for optical repeated signalization of the state of a detector or a set of detectors in fire alarm systems. It can be connected to conventional or addressable detector lines.
This product should be used especially when an installed detector is not visible, e.g. in spaces above suspended ceilings, in cable ducts, etc.
This product should be used especially when an installed detector is not visible, e.g. in spaces above suspended ceilings, in cable ducts, etc.
STOP nyomógomb (kék)
PW-61
The fire extinguishing buttons are designed for manual activation (the PU-61 button) or for aborting (PW-61) the fire extinguishing process. They can be used in lines of the automatic fire extinguishing controllers IGNIS 1520M and POLON 4500 manufactured by POLON-ALFA.
The push buttons are designed for SEMI-FLUSH installation and a special assembly frame should be used for FLUSH installation.
The push buttons are designed for SEMI-FLUSH installation and a special assembly frame should be used for FLUSH installation.
Szerelő keret (kézi jelzésadóhoz)
RM-60-R
Felületre szerelt.
Szerelő keret (kézi jelzésadóhoz)
RM-60-O
Felületre szerelt.
Szerelő keret (PU-61-hoz)
RM-60-Y
Felületre szerelt.
Szerelő keret (PW-61-hoz)
RM-60-B
Felületre szerelt.
Tűzoltó nyomógomb (sárga)
PU-61
The fire extinguishing buttons are designed for manual activation (the PU-61 button) or for aborting (PW-61) the fire extinguishing process. They can be used in lines of the automatic fire extinguishing controllers IGNIS 1520M and POLON 4500 manufactured by POLON-ALFA.
The push buttons are designed for SEMI-FLUSH installation and a special assembly frame should be used for FLUSH installation.
The push buttons are designed for SEMI-FLUSH installation and a special assembly frame should be used for FLUSH installation.